10 Years Manufacturer The Har-216618 of multiflex conveyor chains to Swiss Manufacturer

Pitch:25.4(mm)

Shaft diameter:6.8(mm)

Thickness:26.0(mm)

Working load:1830(N)

The material of the Multiflex conveyor chains are POM and all of them have a transport direction of flexibility, low coefficient of friction and has long lifetime. The characters of the products are easily installation and maintenance and high mechanical strength as well as excellent product handling. Besides, All-Ka Multiflex conveyor chains normally in food cans, glass products, milk cartons, as well as the bread conveying. The different type can be available as your requirement, thus as long as you give me the drawing or detailed specification, everything is okay. So All-Ka has the products to suit any customer requirement.

Vulcan Compact Mobile Thermal Desorption Unit – one ton per hour indirect thermal desorption unit. 24″ diameter x 20.5′ overall length rotary kiln with an energy input of approximately 2.4 MMBtu/hr. Heat provided by either fossil fuel burners or electric heating elements. Designed to remediate soils and drill cuttings contaminated with petroleum hydrocarbons. Consists of the following components: Feed System – hopper, live bottom feeder, transfer auger, airlock and feed auger Primary Treatment Unit – Stainless Steel rotary drum, 24″ diameter x 20.5″ long heat zone (Inconel 600 for high temperature applications) Solids Discharge System – incline screw conveyor and dump valve Quench Scrubber – typically 3′ diameter x 5.5′ height, direct contact condensing tower with a vane mist eliminator, two (2) easily serviceable atomizing spray bars and circulation tank Knock-Out Pot – vertically oriented vapor-liquid separator and condensing unit. A helical tube inside the tank forms the heat exchanger in the tower, which reduces shell-side fouling and improves two-phase flow Oil/Water Separator – 40 GPM maximum influent flow rate will remove 20 micron and larger oil droplets, producing an effluent quality of 10 PPM Secondary Treatment Unit – flameless electric thermal oxidizer offers the benefit of high temperature thermal desorption combined with the convenience and reliability of electric operation Water-Cooled Scroll Liquid Chiller – typically 50 nominal tons of cooling provided by dual scroll compressor circuits and fiberglass cooling tower Double Pipe Heat Exchanger – custom-built double pipe heat exchanger offers increased surface area through the use of staggered rack construction Induced Draft Fan – variable speed exhaust fan by Republic Blower Services with a 10 hp electric motor Thermal Oxidizer – minimum 2 seconds residence time at 1,800 degrees Fahrenheit to oxidize all non-condensables

See more information about this unit on our website:

https://www.vulcansystems.com/technologies/thermal-desorption

www.fraingroup.com USED Lock MET 30 +3F, Metal Detector Conveyor, Packaging Machinery. Conveyor thru, S/S, high 3 frequency metal detector rated at speeds up to 60 ft @ min. number of product dependent on application. Has a 20″ W x 12″ H overall product aperture, and can handle up to a 19″ W x 10 1/2″ H product, 72″ L x 18″ W white Intralox product conveyor belt with infeed and discharge height up to 36″, and mechanical arm reject system. Brushed S/S, and Nema 4X construction, with programmable keypad controls, with 100 product presets for auto recall of stored product settings, and is mounted on (4) leg locking caster base frame.
OAD: 60″ L x 42″ W x 50″ H