18 Years Factory offer The series of Har-515 steel table top chain for Cologne Manufacturers

Pitch:25.4 (mm)

Shaft diameter:6.4 (mm)

Thickness:12.65 (mm)

Working load:4000 (N)

Har-515 belongs to the straight plate chain and the material of the product is stainless, It can achieve continuous working and intermit tented operation. The characters about the product are easily installation and maintenance and high mechanical strength as well as excellent product handling. Besides, our products are widely used in a variety of glass bottles, and metal objects transport heavy loads over long distance, the most suitable transportation is all kind of alcohol. The detailed size can be available as your requirement, thus as long as you give me the drawing or detailed specification, everything is okay. So All-Ka has the products to suit any customer requirement.

The decommissioned Reclaimer was relocated to a dedicated demolition area, away from any live plant. The machine was pulled from its stockyard, over a bridge and away from the live conveyor line. The machine was transported to a further designated area for demolition and processing.

Prior to moving the structure, Liberty Industrial disconnected and extracted the impact table from underneath the Reclaimer while it was in the stockyard, without damage to the conveyor belt. Once disconnected from all its services, the 1250t structure was pulled over purposely built extension rails to a temporary position where the machine underwent all preparatory works required for its transport using Self-Propelled Modular Trailers.

To pick-up and secure the Reclaimer in position during transport, a special-purpose 40t steel “transport frame” was fabricated and mounted on the bed of the SPMT trailers. Once lowered to the ground and secured, the structure was pre-weakened to facilitate its demolition with explosive cutting charges. The charges were placed at strategic locations and the pre-weakening cuts verified by our consulting structural engineer. After the structure had been safely collapsed to ground level, a combination of 70t & 36t excavators fitted with shear attachments processed the steel structure for removal and recycling off site.

The SCREENMASTER CS provides efficient cleaning of a bar screen rack and removal of solids from rectangular channel installations. This versatile unit employs a simple, yet effective rotary front clean/front return raking mechanism. It installs at a 75° inclination so it has a very small footprint. This streamlined unit is fully enclosed above the water line.

Learn More: https://www.franklinmiller.com/product/screenmaster-cs/

The SCREENMASTER CS provides smooth quiet operation and is highly reliable. It employs rake heads that penetrate the screen slots as they reach the channel bottom and lift accumulated debris up to a discharge height of up to 38 ft (11.6m) from the channel bottom. The screenings drop out the unit’s discharge chute and into a a SPIRALIFT SC Screenings conditioner/washer or into a bin or auxiliary conveyor.

The SCREENMASTER is fabricated in stainless steel including the unit’s oversized drive chains. Unlike other screens, the SCREENMASTER’s design employs no bottom bearings or sprockets thereby eliminating a major cause maintenance problems.

The SCREENMASTER CS is available with a choice of slots openings from 2 inch down to 1/4″. They are available for any channel width up to 78″wide (2 m).