2 Years’ Warranty for Modular Belts P=2″ Belt Har 6100 raised rib type for Kenya Importers

Har 6100 raised rib type        

Thickness: 15mm

Our company passes ISO9001:2000 quality system. We use standard POM material so that our products have some advantages as follows:
1. Easy installation
2. Good plastic rubber material, best service
3. resistant to corrosion and friction
4. Wear resistant
5. High quality and most competitive price
Our products are mainly used in the following aspects:
For the container manufacturing industry special products and materials are available, such as abrasion resistant polyamide for glass plants, vacuum chains for can making and gripper chains for vertical transport.
For food industry applications modular belts and components are used in deboning, grading and trimming lines for meat, poultry and seafood. A wide range of products is also offered for blanchers, cookers, washers, coolers and processing lines in fruit, vegetables, bakery, confectionary etc. And many more products are available for the handling of packed food.
In automotive industry the products are engineered to meet the most demanding applications, such as rubber processing and tire handling. 

Mushtaq’s Food Machinery; British Manufacturers of Spring Roll Machines, Samosa Machines, Auto Grills,Samosa Conveyor Fryers, Seekh Kebab Grills, Shish Kebab Grills, Kofta Grills, Koobideh Grills, Kabob Grills, Naan Ovens, Chapatti / Roti Machines.
www.mushtaqsfoodmachinery.com

Design and manufacture Stainless Steel Bin Tipper and Flighted Belt Conveyor. Contents from a 120 Litre Wheelie Bin are discharged onto conveyor system located inside production area and discharged into a large trailer 2.6m high located outside.

BT105
Hydraulically driven wheelie bin tipper to tip into hopper positioned on flighted belt conveyor. Bin tipper suitable for tipping standard 120 litre wheelie bins through 135 degrees. Lift height of 1200mm. Bin dimensions to be confirmed (Sample received) – Max weight 100kg. Bin tipper is installed and bolted down in correct position over conveyor. A 120 litre bin is wheeled into tipper, mesh covered side plates protect the operator from moving parts. Two buttons are pressed which initially drives a siren and flashes an orange light warning the operator the receiving conveyor will shortly start. After a set time the conveyor will begin to run, followed shortly by the machine tipping the bin onto the conveyor. The operator continues to press the two start buttons until the conveyor is empty. A second set of buttons returns the tipper back to the lower position ready to load the next bin. Upon release of any buttons the tipper and conveyor machines stop dead. Bin tips in approx 20 seconds. Manufactured from Stainless Steel – Mild steel cylinder – pump not stainless but will be enclosed in stainless cover.

SPECIFICATION Conveyor System
The 4.5m long folded side stainless steel elevator would be free standing & would accept product from the feed tipper. The 3 ply flighted belt (250 mm pitch 40mm high flights, 2 “A” section tracking guides underside) would elevate the product from the hopper through a hole in the wall & discharge via a plastic slitted curtained chute into the waste trailer. The elevator belt return would be enclosed using undertrays spaced off the main structure for cleaning purposes. The elevator belt would be driven by a simple shaft mounted motor gearbox (Bonfiglioli or other) supported using external flanged plastic housed bearings. The elevator would be supplied with it independent isolator powered & controlled from the bin tippers control panel.

Client G’s Growers Ltd Barway, Ely, Cambridgeshire

For a quotation please contact us at the following;
Manual Handling Solutions
58, Paige Close
Watlington, King’s Lynn,
Norfolk PE33 0TQ UK
Tel 01553 811977
[email protected]

https://www.manualhandlingsolutions.co.uk