Best Price for Middle Handle Conveyor Parts Supply to Turkmenistan

Squaring-edgebanding line complete of:

Feeder BARGSTEDT – Mod: TBK 18/D/30/12/D – Year: 2000

CONTROL SYSTEM
• Numerical control PC POWER CONTROL
TECHNICAL FEATURES
• Double loading position for panel in the production line
• Workable panels in double row
• Useful working width 1.300 mm
• Useful working length 3.000 mm
• Vacuum pump
PANEL FEEDING SYSTEM
• Introduction of stack in the loading system by motorized ground roller
• Ejection of the martingale panel from the loading system by motorized ground roller
• Motorized transfer of panel insertion to the production line
• Suction cupboards for the handling of panels that are raised and laid with a vacuum drive system for the holding of the workpieces
• Suction caps for each support bar
• Automatic device for removing panels from the suction cup
NORM AND OPTIONAL FOR SECURITY
• CE Marks
• Protection fences fixed on machine

Panel turner BARGSTEDT – Mod: TBK 18/D – Year: 2000

TECHNICAL FEATURES
• Useful working width 1.300 mm
• Useful working length 3.000 mm
NORM AND OPTIONAL FOR SECURITY
• CE Marks

Squaring-edgebanding machine HOMAG – Mod: KF 20/21/PU/30/3 – Year: 1996

CONTROL SYSTEM
• Multiaxes numerical control HOMATIC
• Programming and control system with the following features: screen color – visual display
• Separated electrical cabinet
TECHNICAL FEATURES
• Useful working width min – max 240-1.200 mm
• Useful working length min – max 240-2.700 mm
• Adjustable working width / length directly from NC
• Panel protrusion (adjustable with movable tables) 35 mm
• Useful working height with straight edge min – max 10-60 mm
• Edge thickness in rolls min – max 0.3-3 mm
• Wheelbase Ratchets 500 mm – Adjustable height from NC
• Track advancement speed 10-40 m / min adjustable by inverter directly from NC
INTRODUCTION AND PANEL ADVANCEMENT SYSTEM
• Slide track made of steel mesh with smoothness guaranteed by special bearings – The panel stays on flat grounded rubber table with high grip and stain resistant
• Top pressure unit made of a rubber strap with stain resistant coating
• Top pressure unit with adjustable height by NC
• Adjustable in-feeding track
• Automatic central support for supporting pieces
SQUARING AREA FOR EACH SIDE
• Milling unit with pneumatic intervention used as splinter during processing with panel in cross position
• Double hogging unit with overlapped horizontal engines for material removal in order to ensure the parallelism of the sides of the panel
• Pre-milling unit with nr. 2 motors one of which with a timed entry
GLUING, LOADING AND PRESSURE OF THE EDGE FOR EACH SIDE
• Gluing unit SP3/SF for EVA glue
• Gluing unit for PU glue
• Interchangeable Teflon glue tank
• Magazine for edge coils with nr. 6 positions with automatic edge exchange operated by CN
• Horizontal shears for cutting of roll materials
• Nr. 1 Pressure roller (diam.180) motorized by inverter
• Pressure roller conveyor with timed rollers on straight profiles – Nr. 5 pressure rollers
EDGE BANDING AREA FOR EACH SIDE
• End-cutting unit with nr. 2 motors motors to cut the excess of the edge on the front and back of the panel up to 3 mm – Motors with automatic tilt from 0°/25° by NC – Motors power 0.65 kW 12.000 rpm each
• Chamfering unit with 2 independent tilting motors on the horizontal from 0 ° to 45 ° – Automatic pneumatic exclusion of the unit – motor power 0,65 kW 12.000 rpm each
• Rounding unit with nr. 4 motori – Motors power kW 0,65 12.000 rpm each
• Moudling unit with pneumatic intervention
• Scraping unit with positioning of revolving groups managed by CN for the finishing of edges in ABS / PVC / PP of deep thickness to eliminate the imperfections derived from previous work on the top and bottom edge
• Glue scraping unit to remove any glue excess on the flat surface of the panel near the edges
• Brushing unit with 2 motors to clean and polish the rounded edge
NORM AND OPTIONAL FOR THE SECURITY
• Safety CE marks
• Protection and sound-proof cabin of the working units
• Aspiration system on the top part of the protection cabin

Panel turner BARGSTEDT – Mod: TSK 18/D – Year: 2000

TECHNICAL FEATURES
• Useful working width 1.300 mm
• Useful working length 3.000 mm
NORM AND OPTIONAL FOR SECURITY
• CE Marks

Stacker BARGSTEDT – Mod: TSK 18/D/30/12/S – Year: 2000

CONTROL SYSTEM
• Numerical control PC POWER CONTROL
TECHNICAL FEATURES
• Single loading position for panel in the production line
• Workable panels in double row
• Useful working width 1.300 mm
• Useful working length 3.000 mm
• Vacuum pump
PANEL FEEDING SYSTEM
• Out-feeding of stack from the unloading system by motorized ground roller
• Motorized transfer for panel receiving from the production line
• Suction cupboards for the handling of panels that are raised and laid with a vacuum drive system for the holding of the workpieces
• Suction caps for each support bar
• Automatic device for removing panels from the suction cup
NORM AND OPTIONAL FOR SECURITY
• CE Marks
• Protection fences fixed on machine