Cheapest Price Modular Belts P=1.07″ Belt Har 900 non-skid flat top to Mecca Manufacturers

Har 900 non-skid flat top     

Thickness: 12mm

Our products use POM material so our products are wear resistant and resistant to heat and so on. They are mainly used in the following aspects:

In beverage industry palletizes, depolarizers, washers, labelers, fillers, pasteurizers, incliners, out feeds, elevators and accumulation tables are equipped with slat band chains, curves, sprockets, belts, leveling elements and many more conveyor components.
For the container manufacturing industry special products and materials are available, such as abrasion resistant polyamide for glass plants, vacuum chains for can making and gripper chains for vertical transport.

In automotive industry the products are engineered to meet the most demanding applications, such as rubber processing and tire handling.

This project involved the design and fabrication of a sauce-dosing conveyor system. The machine is designed to advance four trays per index. When the index stops, fiber optic detectors determine whether a tray is present underneath the dosing nozzle. If a tray(s) is missing, then that nozzle does not open. The PLC and HMI is recipe-driven, so for a given product, the number of dosing strokes can be different. The weight of sauce per tray is determined by the stroke length of the piston filler; the longer the stroke the greater the weight. The hopper is equipped with a stir paddle and detection probe. As sauce is expended, a pressurized filling tank automatically refills the hopper.

I used an Allen-Bradley MicroLogix 1400 PLC and AVG HMI. A PowerFlex 40P and a Marathon vector motor indexes the conveyor. I used step-logic and encoder feedback to control the index. A second PowerFlex 40 controls the speed of a radius discharge conveyor. Trays leaving the sauce conveyor are ejected onto the radius conveyor and into a vacuum packaging machine.

All welding for this project was performed using the gas tungsten arc welding (GTAW) process, in accordance with AWS D9.1M/D9.1; D1.6/1.6M; and D18.1/18.1M. There were a number of areas that required autogenous welding, such as the injector nozzles. All tubing was welded in accordance with D18.1/18.1M, in order to prevent oxidation (sugaring) of the surfaces exposed to product.

The PLC and HMI have a very sophisticated application program. I included a number of service and maintenance screens, whereby the VFD operating parameters can be monitored (via RS485); for example, DC bus voltage, output voltage, output current, output frequency, etc. In addition, the VFD can be tuned from HMI.

The index speed, length, doses/tray, discharge speed, and other parameters can be changed for a given recipe selection. The HMI is equipped with an audible alert and popup messages appear automatically, to warn of any system problems (e.g., loss of air pressure, failure in the downstream packaging machine, etc.). If the downstream equipment faults, then the dosing conveyor automatically executes a cycle stop.