factory customized The series of Har-2350 M multiflex conveyor chains for Turkey Importers
factory customized The series of Har-2350 M multiflex conveyor chains for Turkey Importers Detail:
Pitch:33.0(mm)
Shaft Thickness:6.0(mm)
Working load:150(N)
The material of the Multiflex conveyor chains are POM and all of them have a transport direction of flexibility, low coefficient of friction and has long lifetime. The characters of the products are easily installation and maintenance and high mechanical strength as well as excellent product handling. Besides, All-Ka Multiflex conveyor chains normally in food cans, glass products, milk cartons, as well as the bread conveying. The different type can be available as your requirement, thus as long as you give me the drawing or detailed specification, everything is okay. So All-Ka has the products to suit any customer requirement.
Product detail pictures:
"Quality initial, Honesty as base, Sincere company and mutual profit" is our idea, so that you can create consistently and pursue the excellence for factory customized The series of Har-2350 M multiflex conveyor chains for Turkey Importers, The product will supply to all over the world, such as: Southampton, Honduras, Palestine, To achieve reciprocal advantages, our company is widely boosting our tactics of globalization in terms of communication with overseas customers, fast delivery, the best quality and long-term cooperation. Our company upholds the spirit of "innovation, harmony, team work and sharing, trails, pragmatic progress". Give us a chance and we will prove our capability. With your kind help, we believe that we can create a bright future with you together.
20×80 Stainless Steel Conveyor with Vibrating Chute
This unit is a 20×80 Eriez stainless steel conveyor with vibrating chute, powered by a 1/2-hp, 208-230/480V three-phase Leeson gearmotor with Warner brake. Belt conveyor with stainless steel pan which dumps onto a stainless steel vibrating chute. Belt conveyor pan is 20″ wide x 80″ long and has 12″ sides. The belt portion is about 70″ long in the pan area. The chute is about 26″ long overall. Eriez magnetic vibrator under the chute. 115V Val-U-Beam sensors mounted one each side. Includes pad feet. Good condition.
https://www.wwrequip.com/equipment/e110209.htm
For more information and offer inquiry: info@packpark.com.tr
Ultimate 60 C Product Properties:
Features:
- Two single wound films are placed on to the upper and lower side film carriage rollers
- Top and bottom motorized film drive and relevant film advance balancer attachments
- 90ºInfeed belt for automatic infeed
- Advantage of making group sets with the benefit of 90º infeed belt
- Photo eye control for package infeed
- Pneumatic pusher with side guides for package infeed
- Automatic discharge belt until heat tunnel
- Constant sealer to give two seals with a center cut fitted with a cartridge heater
- Digital temperature controller for consistent seal with a thermocouple control
- Pneumatic cylinder and double heavy duty linear bearings for accurate motion
- Easy to change rubber and Teflon set on the bottom jaw
- PLC programmed software for customized inquiries and flexibility
- Detection sensor against package or hand entrapment
- Optional holder to keep the package steady during sealing by soft vertical cylinder
- Max. height adjustment for the jaw
- Smooth product transfer through the tunnel conveyor.
- Speed controller for conveyor and heat adjustment for powerful shrinkage at PE films
- Secondary and emergency heat controller for safety regulation in shrink tunnel
- Air flow control flaps with handle for shrink tunnel
- Post cooling switch to cool down to 70ºC before switch off
- Silicon coated tunnel conveyor bars for perfect heat insulation
- Two layer design heating room to minimize the energy losses
- Together with standard casters for easy moving
- Optional wire belt or Teflon mesh belt can be applied upon request
- ISO 9001 quality standard with the relevant norm’s confirmations, CE marking,
- Manufacturer’s guarantee for spare part stock, one year warranty on non-wearable parts
- ISO 9001 quality standard with the relevant norm’s confirmations, CE marking
- Manufacturer’s guarantee for spare part stock and after sales support.
- One year warranty on non-wearable parts
By Jill from Bulgaria - 2015.06.09 12:42
Wide range, good quality, reasonable prices and good service, advanced equipment, excellent talents and continuously strengthened technology forces，a nice business partner.
By Sandy from Philippines - 2015.12.11 11:26
