Factory directly provided The Har-1400 of multiflex conveyor chains to New Orleans Manufacturer

Pitch:82.5(mm)

Shaft diameter:9.5(mm)

Thickness:28.6(mm)

Working load:4700(N)

The material of the Multiflex conveyor chains are POM and all of them have a transport direction of flexibility, low coefficient of friction and has long lifetime. The characters of the products are easily installation and maintenance and high mechanical strength as well as excellent product handling. Besides, All-Ka Multiflex conveyor chains normally in food cans, glass products, milk cartons, as well as the bread conveying. The different type can be available as your requirement, thus as long as you give me the drawing or detailed specification, everything is okay. So All-Ka has the products to suit any customer requirement.

SSI Schäfer has commissioned a high-performance CLOOS robot welding machine for its complex welded assemblies. Fitted with a welding torch changing system the QRC360E robot uses two welding processes: the high-capacity Tandem Weld process and the pulsed arc Speed Weld process. Due to the extended special welding torch and the eccentric axis the robot disposes of the necessary working space and flexibility to perfectly weld the complex component.

https://www.specialprojects.com/equipment/6615/
Bit Corp. Cyclone C-RH rotary head belt washer. The belt washer is used on open mesh belt conveyors. The portable belt washer consists of a rotary wash head, a high pressure pump, 2 air knives, a pressure blower, and a stainless steel platform cart. The 42.75″ diameter rotary wash head has stainless steel rotating wash arms with high pressure spray nozzles that mounts to the conveyor and is driven by air. The wash head connects to a General Pump Triplex Plunger pump T series 50 7.5 hp 1760 rpm high pressure pump that is rated up to an estimated 3-4 gpm at 1500-2000 psi. The 2 tear drop aluminum air knives that are used for drying are 43″ long each. The centrifugal blower for the air knives has a filter and is driven by a 7.5 hp 3530 rpm motor. The stainless steel cart has the pump and blower mounted with an area to hold the wash head ta allow you to easily move from one belt to another. Requires 230/460 vac 3 phase electrical supply, compressed air supply, and water supply.