Factory supplied Modular Belts P=2″ Belt Har 6100 raised rib type to Istanbul Factories

Har 6100 raised rib type        

Thickness: 15mm

Our company passes ISO9001:2000 quality system. We use standard POM material so that our products have some advantages as follows:
1. Easy installation
2. Good plastic rubber material, best service
3. resistant to corrosion and friction
4. Wear resistant
5. High quality and most competitive price
Our products are mainly used in the following aspects:
For the container manufacturing industry special products and materials are available, such as abrasion resistant polyamide for glass plants, vacuum chains for can making and gripper chains for vertical transport.
For food industry applications modular belts and components are used in deboning, grading and trimming lines for meat, poultry and seafood. A wide range of products is also offered for blanchers, cookers, washers, coolers and processing lines in fruit, vegetables, bakery, confectionary etc. And many more products are available for the handling of packed food.
In automotive industry the products are engineered to meet the most demanding applications, such as rubber processing and tire handling. 

Metal detector

hot air cabinet dryer,hot air circulating laboratory cabinet drying machine,فرن تدوير الهواء الساخن
Any questions,feel free to contact me.
Email:[email protected]
Skype:zhang.tracy6
More information:https://twitter.com/htpmachinery

Chick here to subscribe us

https://www.youtube.com/channel/UCo4XjYB_mRONyQKah8jbjVw

Specifications(1).Name:Drying Conveyor Oven,CT-C/CT
(2).Widely used
(3).Large handling capacity ,Low energy consumption
(4).GMP

Principle:

The product was upgraded and regenerated for several times and has reached to advanced level both at China and all over the world. It uses steam or electric heater as heating resource and uses axial fan, heat exchanger to heat air in convective way. The laminar flow of hot air passes through the baking trays and will carry out heat transmission with material. Fresh air will enter into the oven from inlet to supply and then discharge from damp outlet. Fresh air is supplied, wet and hot air is discharged continuously. In this way, suitable RH in oven can be maintained. The ultimate advantage of oven is that most hot air is cycled in the oven, it increases heat transmission and saves energy source. It makes thermal efficiency of oven raise from 3-8% of traditional drying oven to about 35-50%. It uses the function of reinforced ventilation to decrease temperature difference from up to low. The oven delivered by our factory is adapted air distribution device. Before application, customer can adjust fan blade in order to make the temperature difference at the best state.

CT series oven is not equipped with automatic control. It adapts 4-72 centrifugal fan. Model CT-C series oven adapts low noise high temperature resistant axial fan and also equips with automatic constant temperature control system, computer control system for customer’s choice.

Explanation:

1. There are four kinds of heating resource for choice: steam, electricity, heat conducting oil, both steam and electricity.

2. The temperature (steam heating): 50-140°C, Max 150 °C

3. The temperature (when using electricity and far-infrared): 50-300°C

4. The automatic control system or the computer control system is selectable.

5. Commonly used steam pressure 0.2-0.8 MPa (2-8kg/cm2).

6. Standard electric heating is 15kw for type CT-1,CT-C-1, easy flammable and explosive material is forbidden.

7. The special requirements should be indicated at the time of order.

8. The price for the non-standard oven should be consulted.

9. If the operation temperature is more than 140°C or less than 60°C, it should be indicated at the time of order.

10. The oven and baking tray made by our factory are uniform in the dimensions, and can be exchanged with each other.

11. Baking tray dimensions: 460*640*45mm

12. Explosive-proof motor and control cabinet as option.