Manufacturer for The series of Har-1800-K126 flexible chain to Georgia Manufacturers

MODOMEKAN DIAPER LINE
Hammer mill pulp defibrator H50C for treated and untreated roll pulp, complete with 90kw motor transport fan and electrical control equipment
Roll stand with roll conveyor for six rolls, upto 20″ 500mm wide and 50″1260mm diameter
Roll pulp feeding system complete with variable speed control synchronised with machine speed, water feed unit of spray vaporiser type

Forming station for production of, fluff matt with a variable width between 280-450 mm complete including:
Two chamber vacuum box
Gauges for measuring the under pressures in the vacuum box and forming hood
Nylon mesh belt for direct forming of fluff ¬matt without extra carrier layer
Automatic guidance system tor mesh belt
Guidance system for bottom tissue layer
Double scarfing rollers for leveling and fluff matt, with motor drive
Two vacuum fans, 2 x 11kw including operating controls in the maneuver panel
Roll stand with double spindles for bottom tissue layer
Adjustable forming section for medium and large size diapers, all other necessary change parts for these two sizes will be included in the machine supply

Embossing station complete including:
Embossing rollers for impression of standard diamond pattern
Cutting device for configuration of the inner pad water jet system, guidance system for two sizes of product
Connecting and recovery system for waste pulp and tissue including recycling to the forming section via the hammer mill
Slitting and folding system for extra central layer of fluff and tissue
Cutting station for inner pad
Main drive for the diaper machine, 11.3kw variable, speed DC motor
Roll stand with double spindles for upper tissue layer

Station for applying PE film and rubber bands complete including:
Station for separation of inner pads
Rubber band applicator including Meltex glue system and band run out detector system
End sealing rollers
Meltex hot melt applicators complete with hoses and nuzzles for longitudinal application on both PE film and nonwoven material
Roll stands with double spindles for nonwoven and for PE film
Nonwoven roll drive system

Station for tape application complete including:
Tape applicators model MCM 600 for continuous operation
Tape detection system for automatic rejection of products with missing tapes and tape runoff detector system

Configuration station complete including:
Cutting device for configuration of the nonwoven and PE film, i.e., final shaping of the product water jet system, guidance system for two sizes included
Collecting system of nonwoven and PE film waste for transport via fan to external waste bin
C folding unit
Pulling and pressing unit
End cutting station

Packing station complete including:
Centre folding unit
Waste reject system actuated by electronic tape detector or by machine inspector control panel
Vane collator with device for compensation of waste through waste reject system

Electronic programmable control system for supervising and controlling all internal electric function within the machine

Complete flow system unit for water jet cutting including:
Equipment as described above, separate intensifier unit with connecting pipes and connections, filters for mechanical filtration of water supply

Machine guarding to European standard specification

Bag filter BFMD complete with frame, bags and rinsing hoppers

Additional upgrades into this base MODO machine
MODO / FCM frontal tape applicator with dual poly unwind system and automatic guiding / tracking systems, new and installed 1993
Ospray super absorbent polymer SAP dosing applicator to convert the basic pulp diaper into ultrathin, thinner product yet more absorbency via the gel locking of the SAP, new and installed 1991
Muestis elastic band splitter to create a multi strand elastic leg gathers to reduce leakage, new and installed 1991
Mercer / ITW Dynatec spray glue applicator for the improved tension of the multi strand elastic i.e. reduce red lining, new and installed 1991
On line ITW Dynatec frontal glue applicator with tank
Web guiding system for nonwovens

General
Year of manufacture: 1991, upgraded 1993

inline capping machine for round jar with conveyor belt adhesive labeller línea máquina taponadora

https://www.chinesepacker.com

Any questions,feel free to contact me.
Email: sales@chinesepacker.com Skype:zhang.tracy6 Tel:0086-13262514660
Click here to subscribe us

https://www.youtube.com/channel/UCo4XjYB_mRONyQKah8jbjVw

Introduction:
Our new Automatic Capping Machine lid-revolver style has been improved recently by our company. The machine’s appearance is artistic and scholar. It’s quick lid-revolving speed, high conformity rate makes it suitable for different bottle shapes. The Lid-revolving is suitable for bottles and caps of the foodstuff, pharmacy, daily chemical industry, pesticide, cosmetics, etc. The four units of speed-adjustable motors are separately used in lid-feeding, bottle-clamping, conveying and lid-revolving, the machine has a high automation degree, good steadiness, convenient adjustment, changing bottle sizes or lid, needn’t any parts, only need some adjustments (for example, link with the lid-feeder, may automatically feed lids)
Application:
Suitable for different size of all kinds of bottle.
It is used in PET bottle, plastic bottle, glass bottle, Metal bottle etc.
Features:
1. Capping speed up to 150 CPM
2. One button to adjust height
3. Wide applicability for various caps and bottles
4. Auto stop and alarm when lack of cap
5. Stainless steel frame
6. No-tool adjustment
7. Choice of various types of cap feeders
Characters:
This automatic inline capping machine has four speed-adjustable motors which separately used in lid-arranging, sleeve lid, lid-capping and conveying,in the capping process can be automatic arrange lid, automatic sleeve lid, automatic capping.As the machine use bottle-clamping belt to ensure the bottles not fall down when lid sleeving and capping, this capping machine has simple structure, good steadiness, adjust convenient, no need to change spare parts,only need some adjustment. Suits for the round shape,rectangular flat shaped and irregular shape bottle capping for foodstuff,pharmacy,cosmetic,daily chemical,fertilizer and chemical industry.
1.Adopt agile module combination, new ideal design, suit to various bottle and cap-rotating.
2.Needn’t change parts, easily adjust is ok.
3.Easy operation and convenient for maintenance.
4. Capping system consist of first rotating and re-rotating the degree of moment may be adjusted singly. Ensure that will be tight. The screw capper has clutch to avoid the cap over-rotating.
5.Bottle nipping and annular belt structure, Good effect for some bottles erecting unsteadily.
6.Cap arranging part, conveying part, cap-rotating, belt for bottle, nipping, all of speed can be governing separately, which is more utility.
7.Choosing automatic cap-sender and cap hopper
8.The plastic bottle cap sealing machine is designed according to requirements of GMP.

Main technical parameters:
Production Capacity 50-150 bottles/min
lid sizes 15-70mm
bottle diameter Φ 35-140mm
bottle height 30-380mm
working air pressure 3-5kg/m3
contour sizes 2000*870*1500mm
Production Capacity 150 bottles/min

About Packing:
To ensure our service quality, we will execute the following packaging standards in delivery:
1.All the products before delivery should be tested by assemble and debugging engineer, wiped up and cleaned, then wrapped by stretch film to protect it from moist. The precision part need to flexible package.
2.In addition, without standard tools, manual and other documents, and allow ex-factory confirmation sheet, the machine cannot leave factory All the products will be packed in wooden case. The exported products use plywood case to pack. The foot margin of equipment fixed tightly to make the machine can experience loading and uploading, the upward mark will be posted on the wooden case.
Pre-sales:
According to client specific labeling requirement, supply reasonable machine sketch map,quotation and similar video for client ref first.

During Sales:
1) Depends on client products and labeling position, made reasonable reform base on the standard machine.
2) Repeat 20 ongoing hours testing equipment operation stability .
3) Execute GMP certification for the equipment and materials used in the production process requirement and specification strictly.

After sale:
1. Range experienced senior engineer come to client company for installation .
2. Supply systematic operation training for client workers.
3. Guarantees all equipment (except human factors) within one year, lifetime maintenance sevices.
4. After client use the machine for several years, we can provide a detailed refurbishment program, the original equipment and replacement of hardware and software upgrades.
5. If quality problems arise, the supplier provide technical support and timely supply wearing parts.