Manufacturer of Modular Belts P=1.07″ Belt Har 900 flat-top dynamic transition chain to New York Factories

Har 900 flat-top dynamic transition chain     

Thickness: 8.7mm

Our products use POM material so our products are wear resistant and resistant to heat and so on. They are mainly used in the following aspects:

In beverage industry palletizes, depolarizers, washers, labelers, fillers, pasteurizers, incliners, out feeds, elevators and accumulation tables are equipped with slat band chains, curves, sprockets, belts, leveling elements and many more conveyor components.
For the container manufacturing industry special products and materials are available, such as abrasion resistant polyamide for glass plants, vacuum chains for can making and gripper chains for vertical transport.

In automotive industry the products are engineered to meet the most demanding applications, such as rubber processing and tire handling.

This type of Commutator Hot-stacking Machine is applied to fuse the armature commutator hook. It has cooling system to cool down the commutator after its fusing process. It is controlled by PCL, all the data setting can be done on the touch screen. It can weld both riser and hook type commutator. There are four power control method, namely secondary constant current, secondary constant voltage secondary constant frequency. This machine can automatically fuse, and operator only need to load and unload rotor.

(2) Main technical data:
Feeding method: automatic feeding. Loading and unloading
Parameter setting: touch screen and power parameter setting
Power control method: current feedback, high precision countercurrent
Commutator type: both hook type and raise type
Wire diameter: 0.1mm-1.2mm
Armature OD. φ10mm-φ50mm
Shaft OD: φ5mm-φ15mm
Commutator O.D.: φ15mm-φ40mm
Commutator slot/hook number: ≤36
Current range: 0.5-50KA
Voltage range: 0.1-9.99V
Power range: 1.00-99.99KW
Power control method: secondary constant current, secondary constant voltage secondary constant frequency
Welding standard parameter range (1-63groups)
Electric parameter testing setting range: current: 00.00-99.99KA(0.01KA per unit), voltage: 00.00- 99.99V(0.01V per unit), Frequency: 00.00-99.99KW(0.01KW per unit)
Cooling method: water cooling
Air source: 4kg/cm2—6kg/cm2
Power supply: three phase AC380V±10% , 50HZ 40KW
Machine weight: 800kg

Contact person: Effy( [email protected])
Web: www.nide-group.com www.nide-auto.com

To view additional machinery on our website click here: https://www.fraingroup.com/equipment-categories/labeler/

Tronics Model 3S3, stainless steel, front, back and wrap, pressure sensitive labeler rated from 100″ to 1,200″ on front / back labels and 50″ to 600″ on wrap labels per minute with number of product – depending on materials and application. Label size range: 1″ to 8-1/2″ in Height; 12″ in length and can handle containers up to 8″ in diameter. Equipped with 120″ long x 7-1/2″ wide Delrin conveyor, adjustable guide rails, 60″ long x 1″ wide top hold down conveyor, spacing wheel, aligning chains for container squaring, dual label heads with 9″ high peeler plates and 16″ long x 6″ high side wrap conveyor all hand crank adjustable.
Control panel has touch pad controls with read out and e-stop. Mounted on stainless steel base frame with casters and leveling legs.

OAD: 108″ L x 72″ W x 72″ H