Manufacturing Companies for The series of Har-845 plastic slat top chains to Zambia Factories

Pitch:12.7(mm)

Thickness:11.1(mm)

Working load:2430(N)

Har-845 belongs to the straight plate chain and the material of this product is POM.Besides, it easy installation and maintenance and high mechanical strength. Our products are widely used in food, soft drinks, packaging and can manufacturing, tobacco, medicine and chemical industry, electronics, automobiles and logistics, etc .In addition, as long as you give our the drawing and detailed specifications, All-Ka has the products to suit any customer application.

Squaring-edgebanding line complete of:

Feeder BARGSTEDT – Mod: TBK 18/D/30/12/D – Year: 2000

CONTROL SYSTEM
• Numerical control PC POWER CONTROL
TECHNICAL FEATURES
• Double loading position for panel in the production line
• Workable panels in double row
• Useful working width 1.300 mm
• Useful working length 3.000 mm
• Vacuum pump
PANEL FEEDING SYSTEM
• Introduction of stack in the loading system by motorized ground roller
• Ejection of the martingale panel from the loading system by motorized ground roller
• Motorized transfer of panel insertion to the production line
• Suction cupboards for the handling of panels that are raised and laid with a vacuum drive system for the holding of the workpieces
• Suction caps for each support bar
• Automatic device for removing panels from the suction cup
NORM AND OPTIONAL FOR SECURITY
• CE Marks
• Protection fences fixed on machine

Panel turner BARGSTEDT – Mod: TBK 18/D – Year: 2000

TECHNICAL FEATURES
• Useful working width 1.300 mm
• Useful working length 3.000 mm
NORM AND OPTIONAL FOR SECURITY
• CE Marks

Squaring-edgebanding machine HOMAG – Mod: KF 20/21/PU/30/3 – Year: 1996

CONTROL SYSTEM
• Multiaxes numerical control HOMATIC
• Programming and control system with the following features: screen color – visual display
• Separated electrical cabinet
TECHNICAL FEATURES
• Useful working width min – max 240-1.200 mm
• Useful working length min – max 240-2.700 mm
• Adjustable working width / length directly from NC
• Panel protrusion (adjustable with movable tables) 35 mm
• Useful working height with straight edge min – max 10-60 mm
• Edge thickness in rolls min – max 0.3-3 mm
• Wheelbase Ratchets 500 mm – Adjustable height from NC
• Track advancement speed 10-40 m / min adjustable by inverter directly from NC
INTRODUCTION AND PANEL ADVANCEMENT SYSTEM
• Slide track made of steel mesh with smoothness guaranteed by special bearings – The panel stays on flat grounded rubber table with high grip and stain resistant
• Top pressure unit made of a rubber strap with stain resistant coating
• Top pressure unit with adjustable height by NC
• Adjustable in-feeding track
• Automatic central support for supporting pieces
SQUARING AREA FOR EACH SIDE
• Milling unit with pneumatic intervention used as splinter during processing with panel in cross position
• Double hogging unit with overlapped horizontal engines for material removal in order to ensure the parallelism of the sides of the panel
• Pre-milling unit with nr. 2 motors one of which with a timed entry
GLUING, LOADING AND PRESSURE OF THE EDGE FOR EACH SIDE
• Gluing unit SP3/SF for EVA glue
• Gluing unit for PU glue
• Interchangeable Teflon glue tank
• Magazine for edge coils with nr. 6 positions with automatic edge exchange operated by CN
• Horizontal shears for cutting of roll materials
• Nr. 1 Pressure roller (diam.180) motorized by inverter
• Pressure roller conveyor with timed rollers on straight profiles – Nr. 5 pressure rollers
EDGE BANDING AREA FOR EACH SIDE
• End-cutting unit with nr. 2 motors motors to cut the excess of the edge on the front and back of the panel up to 3 mm – Motors with automatic tilt from 0°/25° by NC – Motors power 0.65 kW 12.000 rpm each
• Chamfering unit with 2 independent tilting motors on the horizontal from 0 ° to 45 ° – Automatic pneumatic exclusion of the unit – motor power 0,65 kW 12.000 rpm each
• Rounding unit with nr. 4 motori – Motors power kW 0,65 12.000 rpm each
• Moudling unit with pneumatic intervention
• Scraping unit with positioning of revolving groups managed by CN for the finishing of edges in ABS / PVC / PP of deep thickness to eliminate the imperfections derived from previous work on the top and bottom edge
• Glue scraping unit to remove any glue excess on the flat surface of the panel near the edges
• Brushing unit with 2 motors to clean and polish the rounded edge
NORM AND OPTIONAL FOR THE SECURITY
• Safety CE marks
• Protection and sound-proof cabin of the working units
• Aspiration system on the top part of the protection cabin

Panel turner BARGSTEDT – Mod: TSK 18/D – Year: 2000

TECHNICAL FEATURES
• Useful working width 1.300 mm
• Useful working length 3.000 mm
NORM AND OPTIONAL FOR SECURITY
• CE Marks

Stacker BARGSTEDT – Mod: TSK 18/D/30/12/S – Year: 2000

CONTROL SYSTEM
• Numerical control PC POWER CONTROL
TECHNICAL FEATURES
• Single loading position for panel in the production line
• Workable panels in double row
• Useful working width 1.300 mm
• Useful working length 3.000 mm
• Vacuum pump
PANEL FEEDING SYSTEM
• Out-feeding of stack from the unloading system by motorized ground roller
• Motorized transfer for panel receiving from the production line
• Suction cupboards for the handling of panels that are raised and laid with a vacuum drive system for the holding of the workpieces
• Suction caps for each support bar
• Automatic device for removing panels from the suction cup
NORM AND OPTIONAL FOR SECURITY
• CE Marks
• Protection fences fixed on machine

Wire Mesh Chain Conveyor หรือ สายพานลำเลียงแบบตาข่าย ตะแกรง หรือเส้นลวดถัก

สนใจหรือต้องการข้อมูลเพิ่มเติมกรุณาติดต่อที่ฝ่ายขาย T.086-3272600 ส่งข้อมูลมาได้ที่ [email protected]
หรือเยี่ยมชมและรับข่าวสารต่าง ๆ ได้ที่

https://www.nmec.co.th

https://www.facebook.com/NMECThailand

https://twitter.com/NMECThailand