professional factory for The series of Har-820S Anti-Static plastic slat top chains to Kenya Manufacturer

Pitch:38.1(mm)

Shaft diameter:6.35(mm)

Thickness:14.2(mm)

Working load:1230(N)

The material about Har-820GHA-K118, Har 820GHA-K157,Har 820/831 and 820S are generally PP. They are belongs to straight plate chains and they can easy installation and maintenance and high mechanical strength. Besides,the biggest character about the Har 820S top chanis is that it can antic-static, Moreover ,our products can be widely used in food, beverage, pet bottles and aluminum cans as well as all kinds of containers transport.

The detailed size can be available as your requirement, thus as long as you give me the drawing or detailed specification, everything is okay. So All-Ka has the products to suit any customer requirement.

Dish end surface automatic polishing machine is suitable for all kinds of standard head polishing, conical head polishing,spherical head polishing,torispherical head polishing,industrial pressure head polishing,deformed head polishing, stainless steel elliptical head polishing and stainless steel sealing head inside & outside surface polishing.The dish head polishing machine is extensive apply for the polishing of work piece in the range of medical, chemical, environmental purification, food and beverage, water filtration etc.

For more information and offer inquiry: [email protected]

Ultimate 60 C Product Properties:

Features:
- Two single wound films are placed on to the upper and lower side film carriage rollers
- Top and bottom motorized film drive and relevant film advance balancer attachments
- 90ºInfeed belt for automatic infeed
- Advantage of making group sets with the benefit of 90º infeed belt
- Photo eye control for package infeed
- Pneumatic pusher with side guides for package infeed
- Automatic discharge belt until heat tunnel
- Constant sealer to give two seals with a center cut fitted with a cartridge heater
- Digital temperature controller for consistent seal with a thermocouple control
- Pneumatic cylinder and double heavy duty linear bearings for accurate motion
- Easy to change rubber and Teflon set on the bottom jaw
- PLC programmed software for customized inquiries and flexibility
- Detection sensor against package or hand entrapment
- Optional holder to keep the package steady during sealing by soft vertical cylinder
- Max. height adjustment for the jaw
- Smooth product transfer through the tunnel conveyor.
- Speed controller for conveyor and heat adjustment for powerful shrinkage at PE films
- Secondary and emergency heat controller for safety regulation in shrink tunnel
- Air flow control flaps with handle for shrink tunnel
- Post cooling switch to cool down to 70ºC before switch off
- Silicon coated tunnel conveyor bars for perfect heat insulation
- Two layer design heating room to minimize the energy losses
- Together with standard casters for easy moving
- Optional wire belt or Teflon mesh belt can be applied upon request
- ISO 9001 quality standard with the relevant norm’s confirmations, CE marking,
- Manufacturer’s guarantee for spare part stock, one year warranty on non-wearable parts
- ISO 9001 quality standard with the relevant norm’s confirmations, CE marking
- Manufacturer’s guarantee for spare part stock and after sales support.
- One year warranty on non-wearable parts