Top Suppliers Har P715 Light Power Connector Type Conveyor Parts Wholesale to Georgia

https://www.aaronequipment.com/usedequipment/dryers-drying-equipment/belt-dryers/berndorf-bbs-42263001 – Unused- Berndorf Belt Systems Belt Cooler.The unit is inclined with Endless ‘ Double ‘ Belt Cooling Conveyor, 40” wide, model BBS, NC31 stainless steel. Designed capacity for 1/8” thickness of toner, 725 pounds an hour at a feed temperature of 356 deg F, removal temperature 102 deg F. Upper belt 72” long x 0.040” thick, upper belt height feed end 76-7/8”, discharge height 96-5/8”; lower belt 108” long x 0.040” thick, lower belt height feed end 34-1/4”, discharge end 73-1/4”. Belts driven by a 2 hp, 3/60/230 volt gear motor, belt speed approximately 10-50 feet per minute. Includes a squeeze roll assembly with a 2 hp motor, water tank assembly, and a lower end discharge product breaker assembly with a 2 hp motor. Mounted on a carbon steel frame with casters. Berndorf is similar to Sandvik. Built 2006.

https://www.pacceram.com/inventory/kilns/belt_furnaces_PC12051.html BTU International Belt Furnace, Model TXA96-9-144N24,Work Area: 9″W x 6″H x 144″ Heated, Electric, 230 Volt, 3 Phase, 51 KW, Max. Temp. 1150 deg.C., Delta F Oxygen monitor mounted in front panel, flow meters for Nitrogen entrance and exit curtains, Nitrogen adn Argon chamber flow area also mounted on front panel, Standard BTU mesh belt furnace design with full length alloy muffle, 24″ long load table prior to entering furnace, Nitrogen atmosphere curtains located on both entrance and exit ends, (9) heated zones, each zone 18″ long, heating elements in vacuum formed ceramic fiber modules located over and under muffle, furnace uses nitrogen and argon a atmospheric gases, heated section zones 1-6 then unheated area 12″ long followed by zones 7-9, there is 24″ cooling chamber followed by 36″ nitrogen curtain, variable speed belt control allows many different processes to be run, Condition: Excellent, Overall 37″W x 27’8″L x 67″H.