Wholesale Dealers of Guide C Conveyor Parts for San Francisco Manufacturer

More details:

LIQUID FILLING LINE

AUTOMATIC FOUR HEAD VOLUMETRIC LIQUID FILLING MACHINE MODEL-RDLF-80

DESCRIPTION:
Automatic Volumetric Liquid Bottle Filling Machine works on volumetric principle with diving nozzles. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body, consists of S.S. Slat Conveyor, Reciprocating Nozzle with self-centering devices & SS Syringe. No container No filling system arrangement is standard features of the machine.

The main drive of the machine and conveyor drive consist of A/c Motor with synchronized variable A/c Frequency Drive.

OPERATION:
Containers moving on SS Slat conveyor, feed below the filling nozzles through a settable twin pneumatically operated stopper system. The twin pneumatically operated stopper system and reciprocating nozzles can precisely match for centering of container below nozzles, to avoid spillage of liquid on container.

To minimize foaming adjustable nozzle will reciprocate according to filling dose, nozzle will go upwards slowly from bottom level of bottle towards neck during filling.
The dosing block with a hexagonal bolt fitted below syringes. This means fill size can be easily set.

TECHNICAL SPECIFICATION:
Model PALF-80
Output/Hour* 2400 to 4800*
Direction of Movement Left to Right
Machine dimensions (in mm) 1800 L x 1000 W x 1600 H
Case dimensions (in mm) 2000 L x 1200 W x 1800 H
Net Weight 500 Kgs.
Gross Weight 750 Kgs.
Number of head/Syringe 4 Nos.
Fill Size*** 5 ml to 1000 ml
Power Consumption** Main Machine 2 HP / 415 Volts / 50 Hz.
Conveyor 0.25 HP / 415 Volts / 50 Hz.
Height of Conveyor** 850 mm to 900 mm Adjustable.

INPUT SPECIFICATIONS:
Container Neck Diameter** Minimum 22 mm***
Container Size** Round Shape Ø 28 mm to Ø 100 mm
Respectively height 58 mm to 240 mm
(Height option for other bottle height available)
Flat / Square 15mm to 100 mm (Length)
Respectively 10mm to 50 mm (Width)
Respectively height 58 mm x 240 mm
(Height option for other bottle height available)

NOTE : * Depends on Container size, fill size, Neck diameter of container, and nature of liquid etc.
** We can supply as per customer requirements.
*** With help of change parts.

SALIENT FEATURES:

± 1 % Filling accuracy on single dose.
No Bottle No Filling System.
Rigid vibration free construction for trouble free performance
S.S. Elegantly matt finished body.
Minimum charge overtime, from one size to another container or fill size.
Self-lubricating UHMW-PE guide profile for S.S. slat chain provides low friction wear surface, smooth and noiseless conveying.
Bottle Stopping arrangement through Pneumatic system.
Separate A/c drives for main motor & conveyor belt.
Safety guard for conveyor gearbox, motor and pneumatic cylinders.
Inbuilt protection against over current, voltage fluctuation, short circuit in A/c frequency drive.

OPTIONAL FEATURES:-

Automatic conveyor washing system.
Nitrogen flushing before and after filling.
PLC Control

Acrylic cabinet.
On line pre inspection system.
Float tank (Holding tank) with or without stirrer.

UTILITY REQUIREMENT:
Electrical supply 3 Phase + Neutral + Earthing
Electrical load 1.30 KW
Air Pressure 6 bar pressure 0.5 CFMRIDDHI PHARMA MACHINERY LTD.
Manufacturers & Exporters of Pharmaceutical Machinery
Om-shivam soc., Tarun Bharat Bldg. No.2, Opp. Cigaratte Factory,
Sahar Road, Andheri 28East29 Mumbai-40099.Maharashtra, India
Tel. 91-22-2832 1332/91-22-28389432 Fax 91-22-28382479
Resi 91-22-2683 3777 Mobile 098210-18579
Email [email protected] /[email protected]
Web www.riddhipharma.com/www.riddhipharma.net/www.tabletpress.net.in

This video will show you how to fill large uneven areas, deep voids, gaps and cracks in concrete or stonework. https://www.belzona.com/en/products/4000/4154.aspx

Concrete and masonry surfaces are prone to deterioration caused by abrasion, chemical attack or impact which leaves areas uneven, unsightly and potentially hazardous. Once the damage has occurred, it can be difficult to repair. Repairing concrete with new concrete can prove problematic as concrete shrinks and often does not successfully bond to the old concrete. Other cementitious repair products typically require 28 days to cure creating a long return to service time.

In this how-to video, you will learn how to use a highly cost-effective Belzona repair system to rebuild damaged large floor areas.

Materials Used:

To fill this floor area, we used Belzona 4154 and Belzona 4111 (Magma-Quartz)

https://www.belzona.com/en/products/4000/4154.aspx

https://www.belzona.com/en/products/4000/4111.aspx

How-to Guide:

Step 1: Prior to the rebuild, remove all paint, tar and other coatings and ensure the surface is be clean, firm and dry.
Step 2: Using a mechanical mixer, empty the contents of the Base and Solidifier units of Belzona 4154 (resin) into the mixing bucket.
Allow 1-2 minutes for mixing to achieve a homogenous consistency. See the IFU for further information:

https://www.belzona.com/ViewFile.aspx?id=61602

Step 3: Immediately with the mixer still running, start adding locally sourced aggregate into the resin.
Step 4: Once the materials have a homogenous consistency, pour the mixture into the prepared surface.
Step 5: Mix additional Belzona 4154 with a finer aggregate.
Step 6: Continue to fill the area of damaged concrete until the void has been filled to the top leaving at least ¼” for top coat.
Step 7: Spread evenly and tamp down firmly with the trowel or float to remove entrapped air, to compact Belzona 4154 and to ensure good adhesion with the surface.
This system should be overcoated with a Belzona 4100 series repair mortar within 24 hours.
Step 8: Using a stiff bristled brush, apply Belzona 4911 (TX Conditioner) between the layers covering the entire application area to condition the surface.
Step 9: In this case Belzona 4111 has been chosen as a top coat due to its outstanding chemical and abrasion resistant properties. Combine the contents of this material which includes Belzona 4151 (Magma-Quartz Resin) along with the aggregate Belzona 4111 in a mechanical mixer.
Step 10: Once a homogenous consistency has been obtained, empty the contents of the bucket onto the conditioned surface.
Step 11: Using a trowel, evenly spread the mortar mixture making sure the entire area is covered well.
Step 12: Tamp down to remove any entrapped air, to compact the Belzona 4111 and to ensure good adhesion with the surface

To find your local Belzona products and services supplier please visit: https://www.belzona.com/en/about/disfinder.aspx

Subscribe to our YouTube channel to explore our collection of How-To videos including:

HOW-TO SERIES: How to Create a Drainage Slope with Belzona 4154 and Belzona 5811 https://youtu.be/A8Jueh7h90Y
HOW-TO SERIES: How to apply Safety Markings with Belzona 5231 and Belzona 5233 https://youtu.be/T9WC3y4jNJg

Or read more about our solutions for floor problem areas at https://www.belzona.com/en/applications/fpa.aspx