Wholesale PriceList for The series of Har-1800-K126 flexible chain to Libya Factory

Pitch:12.7(mm)

Shaft diameter:4.0(mm)

Thickness:12.0(mm)

Working load:800(N)

The material of the Har-1880/1900 generally are POM. The biggest advantage is that all of them can competent with whether the horizontal or the vertical rapid turns and friction and noise are small .The characters are easily installation and maintenance and high mechanical strength as well s excellent product handling. Besides, this kind of products are widely used in n food, soft drinks, packaging and can manufacturing, tobacco, medicine and chemical industry, electronics, automobiles and logistics, etc .In addition, as long as you give our the drawing and detailed specifications, All-Ka has the products to suit any customer application.

To view additional machinery on our website click here: https://www.fraingroup.com.
Hytrol TA, 252″ long x 18″ wide, rubber belt conveyor. Equipped with a Relience SP500 variable speed control and a 1/2 hp drive. Mounted on height adjustable legs with an infeed and discharge range of 28″ to 36″.

OAD: 252″ L x 34″ W x 32″ H

For a recent application, a customer needed to move cooked foods between machines, but needed to address issues such as product temperature, sanitary requirements and maintaining product orientation. The customer was moving cooked sausage patties and sausage links from the oven and delivering them to a spiral freezer unit.

A stainless steel wire belt was used for this application due to the need for the belt to withstand the high temperatures of the product coming out of the oven. The wire belt also allows for oils and grease to drain from the product and is easy to clean and sanitize.

The layout of the customer’s machines required the conveyors to move the product at a 45 degree angle. To accomplish this, Dorner built two 7400 Ultimate conveyors that transfer the product between them with a small diameter nosebar tail. The nosebar tail provides a smooth, consistent transfer while maintaining product orientation.

The long nosebar tail has a tool-less, easily removable tail cartridge and ¾” diameter rollers that can be disassembled for cleaning. The design of the transfer tail has the ability to twist so that it matched the adjacent conveyor’s compound angle. The conveyor that is receiving the product is inclined to accommodate the freezer infeed height.

These 7400 Ultimate Conveyors have continuous welds, #4 polish and FDA approved materials throughout, making them ideal for a sanitary environment.